Automotive Timing Belt Market Demand, Supply and Price Analysis 2019 to 2025 | Torx Hex Key

Others receiving votes: Festool (8), Metabo (4), Porter-Cable (3), Ryobi (3), Hercules (2), Hitachi (2), Bosch (1), Ingersoll-Rand (1), Kobalt (1), Panasonic (1), REMS (1), Snap-on (1),

It’s likely that the same job could easily be done with a 3D printer, and indeed we’ve seen it done with a small piece of soft wood and a hammer. But there is something very elegant indeed about this particular incarnation that we like, it may not be the most complex of the hacks you’ll see here but we’re sure you’ll agree if you’ve ever changed a cambelt, it’s a pretty useful one.

The surface quality of a machined part is directly related to the effective width of cut of the end mill. The width of cut is referred to as the stepover length. Each stepover creates a small cusp on the part surface. The greater the milling stepover length, the better the surface finish and the lower the cycle time for milling.

Jacksonville Jaguars: The Jags need to move on from Blake Bortles and former Eagles QBs coach John DeFilippo is now their offensive coordinator. The Jags had a terrible season in 2018 but had a playoff team just the year before.  

We hear that boosted engines love E85, so we decided to put it to the test on the SuperFlow dyno at Westech Performance against some 114-octane race gas.

It’s so helpful to be able to take a small stash of familiar spices with you wherever you go, which is why I love the GSI Outdoors Spice Missile. It can hold up to six spices in containers that all screw together into one space-saving “missile.” It’s leak-proof and waterproof, and holds plenty of spice to get you through even several months of travel.

In addition to Valdes-Scantling, rookie fourth-rounder J’Mon Moore and sixth-rounder Equanimeous St. Brown will need more targets moving forward. The Packers’ young talent at the position makes Cobb expendable, especially because he’s coming off a disappointing injury-plagued year.

Another company offering PFA prepregs is SHD Composites (Sleaford, Lincolnshire, UK). The company was founded in 2010 by Steve Doughty, a 20-year process development engineer with Advanced Composites Group. SHD Composites has grown significantly, adding factories in Slovenia and Mooresville, NC, US. It offers two PFA-based phenolic resin products: FR308 and PS200.

Flashbacks of changing my ’95 4.6 Cougar. That motor was not meant to be in there and the packaging for DIY oil changes was a challenge. Vacuum extractor it is!

We’ve rounded up some awesome deals on anti-fatigue mats, magnetic knife strips, space-saving storage towers and so much more. If you like getting the most bang for your buck, these are the sales for you.

Tool displays can be a shop’s silent salesman. Shops can keep their tools organized with the new tool display from SP Air Corp.

It’s also worth noting that any improvement in the lift curve means you must then re-verify the piston-to-valve clearance. In our engine, the clearances decreased slightly. We found only 0.060-inch piston-to-valve (P-V) clearance on the intake side and a slightly wider 0.090-inch on the exhaust. Reher-Morrison Racing Engines (RMRE) offer a P-V clearance spec that calls for adding 0.010-inch to the existing piston-to-head clearance, which in our case is 0.050-inch, so our intake clearance is right on the edge. This can be adjusted by moving the camshaft centerline.